Archive for October, 2017

October 30, 2017

Back to Basics: Pallet Safety

Safety is priority number one in any good warehouse. Even tasks that seem relatively simple, such as moving pallets, could be dangerous if done incorrectly. Moving big loads of pallets around on pallet racks can be dangerous if your team isn’t following strict safety guidelines, and pallets themselves can pose a lot of risks for those who work around them every day. Make sure your teams are following safety guidelines every time they interact with pallets and retrain them often on pallet safety.

Tips for Safely Interacting with Pallets in Your Warehouse

  • Guard against splinters and nails. Pallets are made from inexpensive wood and aren’t meant to last forever. Make sure you wear gloves and avoid walking on pallets to keep splinters and nails out of your hands and feet.
  • Don’t throw pallets. Not only will this damage the pallet and shorten its lifespan, it can create debris which can harm fellow coworkers. Instead, slide the pallet or use a forklift to create stacks.
  • Inspect pallets before use. If a pallet is damaged, don’t try to use it–send it for recycling. Only sturdy pallets should be used on your pallet rack. Take extra precautions with pallets that will be going high up on your pallet rack.
  • Don’t stand on pallets. Sure, pallets are designs to handle heavy loads of merchandise, but they are only designed to do it when the weight is evenly distributed across the surface of the pallet. When you stand on them, you are putting all of your weight on a localized area of the pallet and risk damaging the pallet and hurting yourself if it breaks.
  • Store pallets flat, not on their end. This can weaken the structure of the pallet and increase the risk that they’ll break when you load them with inventory. Storing them on their end also puts them at risk of tipping over and hurting someone. Don’t stack pallets more than four feet high, though.
  • Clean up any splinters or broken wood from pallets often. It’s inevitable that the occasional pallet is going to break in your warehouse. When this happens, clean up any debris from the broken pallet as soon as possible. That debris could cause slips, trips, falls, or even embed itself in a worker’s leg or foot.
  • Use warehouse equipment like forklifts and pallet jacks to move pallets whenever you can. While it might seem faster to lift and move a pallet with your hands, you actually increase the risk of injury and damage to the pallet. Allowing machinery to do the heavy lifting for you and keep yourself and your fellow workers safe.
  • Clean your pallets once in a while, too, especially if you are handling perishable or consumable items. The wood of a pallet can be a harboring place for bacteria and germs. If you commonly handle food items, you might want to consider using plastic pallets. They may be a bigger investment up front, but they will last longer and be easier to disinfect.
  • Know the load capacity of your pallets and don’t go over it. It’s important to know the weight of your inventory, not only for pallet loading, but for loading your pallet racks as well.

When Should You Replace Pallets?

Pallets aren’t made to last forever. In fact, they have a fairly limited lifespan. This is, in part, what makes them so affordable. They are constructed out of inexpensive and untreated wood that will stand up to a good deal of weight but can splinter and crack relatively easily, especially as it gets older. Eventually, you are going to need to replace your pallets. Here are signs that it’s time to find a replacement.

Looking old doesn’t mean it’s not safe for use.

Most pallets are made of untreated wood. That means the wood that’s used is going to look older long before it’s treated counterparts. Don’t assume that just because the wood is gray or discolored that the pallet is too old for use. It may be much, much newer than you think.

Look for damage, splinters, and cracks.

The best method to determine whether or not a pallet is suitable for use is simply by examining it. Make it a practice to examine every pallet when you unload it to determine whether or not it’s going to be suitable for use again. Look for cracks in the wood, signs of distress around the joints, and chipped or splintered wood. If you spot any of these signs, it’s probably best to send that pallet off for recycling. After all, one of the great things about pallets is that they are cheap; you can replace them without worrying too much about the cost.

What Are Your Tips for Pallet Safety?

Do you have safety tips and guidelines that you utilize in your warehouse when it comes to pallets? We’d love to hear them! Comment on this blog or drop us an email through our website. We may use your safety tip in a future blog!

Use common sense when working with pallets and pallet racks and your team should enjoy a safe work environment. DAK Equipment understands that our pallet racks play an important role in warehouse safety, too. That’s why we offer high-quality pallet racks to Chicago-area businesses and beyond. Our pallet racks are made from top materials, and if you experience any damage, our team can come do the repair work for you. Give DAK Equipment a call today to learn more about our pallet racks installation and repair services.

Read more

 
 
 

October 25, 2017

Racking Protection Keeps Your Investment Safe

You make investments in your warehouse every day. It might be weekly safety training meetings with your team, automation with a new conveyor system, or upgrading your pallet racking system. Whatever you invest into your warehouse needs to be protected. While sometimes that protection might be obvious, like maintaining your conveyors, in other instances the kind of protection that you need might not be as apparent. One area where our warehouse consultants often see a lack of protection is on the uprights of your pallet racking system. Many warehouses in the Illinois area seem to believe their racking systems are invincible and cannot be damaged because they don’t both installing the necessary warehouse equipment to keep it safe. This could end up costing their business a lot of money, time, and potentially even their customers.

Why Your Pallet Racking Needs Protection

You pallet racking takes a lot of abuse throughout the day, especially if forklifts, pallet jacks, and hand trucks are in use (as they are in most warehouse environments). All of this equipment can easily damage your pallet racking. A forklift operator could misjudge a turn and clip the end of a pallet rack, or they might not check their clearance and run into the upright of the racking system. While the visible damage that this causes might seem negligible to you, it could actually weaken the structure. This puts your warehouse in danger of experiencing a racking collapse, which could end up destroying your inventory and even seriously hurting your employees. Preventing this kind of damage is key to keeping your warehouse safe and ensuring the pallet racking you’ve purchased for your warehouse remains in good condition for as long as possible.

It’s important to speak with an experienced warehouse consultant to determine what protection you need for your racking system and then to get it properly installed.

How to Protect Your Racking

Upright Protection

One of the primary ways of protecting your pallet racking is with upright protection. The uprights of your pallet racking system are the vertical beams to which the shelving pieces are attached. There are two main types of upright protection: post protection and barriers at the end of the racks.

  • Column protection. This protection wraps around the upright posts of the racking system, usually providing some kind of cushioning that can take the impact of an accident with a forklift or other warehouse equipment.
  • End of rack barriers. These barriers sit at the end of a pallet racking aisle and prevent warehouse equipment from running into the end of the row. This sort of impact can seriously weaken the system and you may not notice the damage for a period of time.

Other Types of Pallet Racking Protection

The uprights aren’t the only piece of the racking system that should be protected. You should also consider installing pallet stops. These help forklift operators ensure that the pallets are positioned properly on the racking system to create an even weight load and are safely in place without hanging over the back of the racking.

An Ounce of Prevention…

While purchasing protection products for you pallet racking is a great way to help prevent accidents from causing damage, it’s even more effective to try to prevent those accidents from occurring in the first place. You can prevent accidents with your pallet racking from happening by:

  • Training your team early and often. Make sure your team members are aware of the dangers of pallet racking accidents and that they should report accidents immediately in order to prevent injuries and damages.
  • Sending forklift operators for additional training. The safest forklift operators are going to be the ones who have been through training again and again. Once is never enough, so invest in repeat training for your forklift operators.
  • Optimize your warehouse setup. A warehouse that has aisles that are too narrow or doesn’t have the appropriate storage space for its inventory is putting itself at risk for accidents and damage.

Taking steps to prevent damage can help your warehouse ultimately save a lot of time and money. You won’t have to worry about production stopping to repair a collapsed rack, nor will you incurr the costs that come with worker’s compensation claims. It truly is a case where an ounce of prevention is worth a pound of cure.

We Can Help You Protect Your Warehouse

 

DAK Equipment and Engineering in Chicago carries a variety of upright protection and other pallet protection devices so we can help you find the system that’s right for your warehouse. We carry upright post protectors which attach to your floor and surround the post of your racks, protecting them from buckling as well as run-ins with the forklift. We also carry upright protection for your pallet racks from WorldPro, which offers custom sizes, shapes, and designs in powder-coated yellow. Additionally, we offer snap-on upright protection that takes only seconds to install. We’ll make sure you have the protection you need while staying within your budget.

Our team will help you order the protection that you need to ensure both your pallet racks and your team stays safe. Give us a call at 855-863-0340 and we’ll get your order placed for the upright protection you need. Whatever it is you need to keep your warehouse looking its best and operating at peak efficiency, DAK has it! Place your order over the phone or online today.

Read more

 
 
 

October 24, 2017

New Addition to the K3 Werks Safety Products

K3 Werks Brute

We’re happy to announce that DAK Equipment is now stocking the strongest corner protector on the market. Designed in-house, the K3 Brute will protect all the vulnerable corners in a facility from lift truck impacts. Building corners, dock door guides, rack end-of-row corners and more can all benefit from this rugged safety product.

We’ll be honest with you.  The picture doesn’t do it justice.  Two feet high, made from half-inch thick steel, weighing in at 115 pounds, and fastened down with six concrete anchors this thing is literally a brute designed to take heavy impacts and shrug them off.

Because it’s very helpful with new products like this, we’re including the design drawing below to answer most of the questions you may have about the K3 Brute.  Remember that six 3/4″ diameter concrete wedge anchors (DAK Part # CWA-750X550) are needed and are not included.

K3 Brute Design

If you have any questions about the K3 Brute or any of the other products we stock for you, just get in touch.

 

Read more

 
 
 
 

Built by Clique Studios